|
Products -
NBS Plus Specifications
|
Norlift Dock Leveller
| Platform Length |
3000mm ( Excluding Lip) |
| Platform Width |
2000 mm
|
| Height |
600mm ( Pit Depth 600mm)
|
| Lip Length |
400mm |
| Working Range |
Max possible +350mm/-320mm, gradient is 11.5% at +/-320mm (EN1398 recommends 12.5% max gradient).
6000kg single axle load as EN1398 (9000kg total dynamic load.)
0.75kw, 415v, 50Hz, 3 phase plus neutral and earth.
24 volts, constant pressure push button in wall mounted control panel.
Red to RAL 3002.
|
EACH UNIT TO INCLUDE
- All standard operational features.
- All standard safety features including maintenance prop and emergency stop. One pair of rubber dock bumpers 250mm wide and 450mm high x 100mm projection complete with heavy duty steel backing plates when used with pre-cast concrete pits.
- Bush seals to side and rear of platform
- 400mm long lip Special capacity of 6000kg single axle load as EN1398. Hang-in frame for pre-cast pit type 310. (Bullivants type pit).
Norlift Dock leveller:
Standard: To BS EN 1398.
Manufacturer's reference: Northern Doors (UK) Ltd, Kingsforth Road, Thurcroft, Rotherham, South Yorkshire, S66 9HU. Tel: 01709 545 999. Fax: 01709 545 341. Email:
This email address is being protected from spam bots, you need Javascript enabled to view it
Web: www.northerndoors.co.uk
Reference: Norlift Manual Mechanical Leveller
Model 650 Type: III
Model 650 Type: IV
Model 650 Type: V
Model 650 Type: VI
Model 650 Type: VII
Model 650 Type: VIII
Type: Free-standing / Embedded pit version / Self-Hanging Pit Version
Platform size: (l x w):
2100 x 1800mm – for Model 650 Type: III
2100 x 2000mm – for Model 650 Type: IV
2600 x 1800mm – for Model 650 Type: V
2600 x 2000mm – for Model 650 Type: VI
3100 x 1800mm – for Model 650 Type: VII
3100 x 2000mm – for Model 650 Type: VIII
Gradient length:
2500mm – for Model 650 Type: III and Type: IV
3000mm – for Model 650 Type: V and Type: VI
3500mm – for Model 650 Type: VII and Type: VIII
Gradient rise (maximum):
600mm – for Model 650 Type: III and Type: IV
800mm – for Model 650 Type: V and Type: VI
800mm – for Model 650 Type: VII and Type: VIII
Single axle load capacity: Consult with Northern Doors for recommendations and details.
Colour: Paint finish Grey RAL 7003
Consult with Northern Doors for availability of alternative finishes and colours.
Buffers:
400 x 80 x 75mm rubber bumper – Standard size.
250 x 250 x 100mm rubber bumper
500 x 250 x 140mm rubber bumper
400 x 160 x 160mm rubber bumper
1000 x 130 x 100mm rubber bumper
Other requirements:
Free-standing metallic frame with no sides
Free-standing metallic frame with one side
Free-standing metallic frame with two sides
|
