L20 DOORS / SHUTTERS / HATCHES

610 ROLLER SHUTTER . . . . . .

Insulated Steel and Aluminium Roller Shutters.
A range of vertical roller shutters available with manual or electric operation. The shutter when open coils up neatly above the opening and does not encroach or cover the roof area behind the door. Designed for warehouses, industrial units, garages, workshops, schools, hospitals, bus depots, agricultural buildings, etc.
Dimensions:
Opening height up to 6000mm.
Opening width: Contact Northern Doors Technical Department for advice.
Weight: 35 kg/m² of door opening.
Steel Curtain
0.7mm galvanised steel, each section 100mm deep with a twin-ribbed face. The lath is made up from two individual lath sections held together over their length by the interlocking profile quirk section. The lath is built up together with endlocks to form the complete curtain. Infill is inserted into each lath section to provide a 0.7 W/m²/K U-value. The bottom of the curtain is fitted with an extrusion complete with an interlocking rubber strip.
Aluminium Curtain
Aluminium alloy sections incorporating twin ribbed faces for rigidity. Each 100mm section has insulation infill to provide a 0.7 W/m²/K U-value. When assembled, the curtain is held in place with endlocks positioned at each end of the 100mm lath sections. The bottom of the curtain is fitted with an extrusion complete with an interlocking rubber strip.
Roller Assembly
Mild steel tube fitted with counter balance high tensile helical springs, mounted on bright steel shafts running in ball races. Roller is fitted with a machine cut drive sprocket.
Endplates
Roller barrel assembly supported by mild steel endplates with mounting angles for connection to structure.
Side Guides
Cold rolled galvanised mild steel to form a channel section of adequate depth. Guides are fitted with a mild steel mounting angle in order to secure the guides to the opening structure. Plastic wear resistant strips are fitted to the toes of the guides.
Brush Strip
Aluminium extrusion with nylon brush for installation to structural soffit of the opening.
Handchain Operation
Available on shutters up to a size of 3500 x 3500mm. The chain is hauled hand over hand in order to raise or close the shutter. The operation is assisted by means of reduction gears and the counter balanced roller assembly. The handchain position can be handed to suit the site conditions.
Electric Motor Operation
Suitable 415V, 3 phase or 240V single phase motor (subject to shutter size) mounted on the shutter endplate complete with travel limit switches and emergency handchain operation. Control buttons on a surface mounted polycarbonate enclosure provide open, close, stop facility. The motor position can be handed to suit the site conditions.
Finish
All parts not galvanised are painted one coat protective primer (ex works), ready for site painting by others.
Options:
Vision panels
Single or multiple clear polycarbonate 197 x 43mm vision panel incorporated into the lath sections.
Brush strips
Nylon brush strips available to side guides on a mill finish aluminium carrier.
Hood cover
Formed from galvanised steel to enclose the rear of the shutter coil. Also available with powder coat finish.
Motor cover
Formed from galvanised steel to encase the electric motor unit. Also available with powder coat finish.
Controls
A wide variety of electrical controls and automatic control systems are available. Key switches, external control buttons, induction loops, radar activation, radio control, timed close facility, key pad access, etc.
Safety features
Safety bottom edge to underside of bottom rail; if safety bottom edge strikes an object the shutter stops and returns to the open position. Also available are photocell beams; if beam is broken by traffic through the opening the shutter stops and returns to the open position.
Curtain
May be provided without insulation infill, in double or single skin arrangements. In addition, the curtains may be punched with slots to allow for airflow through the curtain. For further information, contact Northern Doors Technical Department.
High speed shutters
Operating speed may be increased in order to provide faster opening and closing times. For further information, contact Northern Doors Technical Department.
Colour finishes
Curtain available in Plastisol colours or powder coated finish from BS 4800 or RAL colour ranges. Powder coat finish may also be applied to other components, i.e. guides, bottom rail, hood, motor cover etc.
Consult with Northern Doors (UK) Ltd technical literature for details. Northern Doors can also provide a design and specification advisory service and it is recommended that they are consulted early in the design process.

Manufacturer: Northern Doors (UK) Ltd, Kingsforth Road, Thurcroft, Rotherham, South Yorkshire, S66 9HU. Tel: 01709 545 999. Fax: 01709 545 341. Email: This email address is being protected from spam bots, you need Javascript enabled to view it Web: www.northerndoors.co.uk 
Product reference: Insulated Roller Shutters.

Performance: 0.7 W/m²/K U-value.

Arrangement: Vertical roller shutter

Shutter curtain:
Steel Curtain
0.7mm galvanised steel, each section 100mm deep with a twin-ribbed face. Each lath is made up from two individual lath sections held together over their length by the interlocking profile quirk section, with endlocks to form the complete curtain.
The bottom of the curtain is fitted with an extrusion complete with an interlocking rubber strip.
Aluminium Curtain
Aluminium alloy sections incorporating twin ribbed faces, each 100mm section with insulation infill and with endlocks positioned at each end of the lath sections.
The bottom of the curtain is fitted with an extrusion complete with an interlocking rubber strip.
Curtain may be provided without insulation infill, in double or single skin arrangements. In addition, the curtains may be punched with slots to allow for airflow through the curtain. For further information, contact Northern Doors Technical Department.
Finish as delivered:
Plastisol / Polyester powder coated
Colour: Consult with Northern Doors (UK) Ltd for availability of alternative colours and to obtain samples.

Frame/ Guides:
Roller Assembly: Mild steel tube fitted with counter balance high tensile helical springs, mounted on bright steel shafts running in ball races.
Endplates: Roller barrel assembly supported by mild steel endplates with mounting angles for connection to structure.
Side Guides: Cold rolled galvanised mild steel to form a channel section, fitted with a mild steel mounting angle to secure the guides to the opening structure. Plastic wear resistant strips fitted to the toes of the guides.
Brush Strip: Aluminium extrusion with nylon brush for installation to structural soffit of the opening.
Finish as delivered:
Galvanised and primed for painting.
Polyester powder coated
Colour: Consult with Northern Doors (UK) Ltd for availability of alternative colours and to obtain samples.
Consult with Northern Doors (UK) Ltd for availability of alternative finishes.

Operation:
Handchain Operation
Electric Motor Operation
Operating speed may be increased in order to provide faster opening and closing times. For further information, contact Northern Doors Technical Department.

Ironmongery: Consult with Northern Doors (UK) Ltd for recommendations and details.

Other requirements:
Vision panels: Single / Multiple clear polycarbonate 197 x 43mm vision panel incorporated into the lath sections.
Hood cover: Galvanised steel to enclose the rear of the shutter coil.
Motor cover: Galvanised steel to encase the electric motor unit.
Controls:
Key switches / External control buttons / Induction loops / Radar activation / Radio control / Timed close facility / Key pad access
Safety bottom edge to underside of bottom rail