|
|
Typical Application
|
| The Loading Pod is a freestanding unit which can be bolted to the outside of a warehouse building and can be installed and commissioned with minimal disruption to operations |
| Advantages |
- Free standing unit which is bolted to the outside of the building.
- Ability to expand your building and operations without having to invest in a brand new building.
- Minimum disruption to your operations.
- Equipped with a loading bay device. Shelter and sectional door as standard.
|
|
Further Information
|
|
Copy the NBS Specifiaction
Download a Industrial Catalogue
Download a Standard Drawing
|
| |
| |
| |
Specification
|
Frame
The framework incorporates appropriate bracing to carry loads transmitted by the dock bumpers and can be externally clad at the sides and roof with either R32/1000 profiled sheet or with 50mm insulated panel
Finishes
The standard colour finish for the insulated panel is white. R32/1000 cladding is available in standard colours. Additional colours are available upon request at extra cost.
Panels
The cladding/insulated panel is finished off with colour matched flashing.
Roof
The roof of the pod is pitched from right to left to allow for water run off.
|
Dock Bumpers
A pair of dock bumpers, 450 x 250 x 100mm are mounted off the steelwork.
Leveller
Loading Pods can be supplied with an internal steel platform which houses a dock leveller and with suitable steelwork to allow for a door to be fitted to the front if required.
Seals
A set of foam pad dock seals/dock shelter/inflatable seal/combi-seal can be fitted to the front of the pod.
Safety
It is recommended that a traffic light system and wheel guides are purchased with Loading Pods to ensure that lorries approach the pod correctly
|
|
Products 