A vertical roller shutters available with manual or electric operation with either solid or perforated curtain.

Dimensions

Opening height up to 6000mm, opening width up to 6000mm.
Shutter weight: 35 kg/m² of door opening.

Curtain

Constructed from 76mm galvanised cold rolled scroll sections of suitable gauge, each alternate lath is fitted with a steel endlock to prevent lateral movement and wind anchor locks on larger doors. The perforated version has multiple micro circular perforations.

Bottom Rail

The base of the curtain is fitted with a steel angle reinforcing rail of adequate size forming an inverted ‘T’.

Side Guides

Formed from cold rolled mild steel channel sections secured to the opening structure by full height mild steel fixing angles.

Roller Assembly

Constructed from mild steel tube, mounted on bright steel shafts running in ball races, reduction drive gearing where applicable is by machine cut steel gears or chain drive to suit the size of the opening.

Polyester powder coat finish to most RAL Colours

Endplates

The roller assembly is supported by mild steel endplates with mounting angles for fixing to the support structure.

Roller Enclosure (optional extra)

Formed from galvanised pressed sheet metal to enclose the rear of the shutter barrel and curtain assembly.

Operation

Conventional electric motor with push button control and chain override.
Tube motor within coil with toggle switch or keyswitch control and hand crank override.
Manual haul chain operation.
Automatic opening and closing

Finish

All parts not galvanised are painted in one coat of grey protective primer.

Optional
Polyester powder coat finish to most ral colours, HP200 pastisol range fo colours (subject to avalibility).