 |
Typical Application
|
| Ideal
for a wide variety of applications including, industrial units,
warehouses, storage buildings, modern vehicle workshops, showrooms,
fire and ambulance needing an easy to operate, strong water proof door.
The door design is open to a wide variety of arrangements, Glazing
infill to provide maximum transmission of natural light, thermally
insulated panels or a combination of both panel types. All panels can
be factory finished to most B.S standard colours.
|
| Advantages |
- Galvanised 14mm x 1.2mm thick tubes.
- Internal or external use.
- Powder coated colour option.
- Brickbond pattern.
- Good airflow properties.
|
|
Further Information
|
|
Copy the NBS Specifiaction
Specifiaction
Download
a Industrial Catalogue
Download Commercial Catalogue
Download a Standard Drawing
|
| |
| |
| |
| |
Specification
|
Visionguard 45 Grille
A range of
roller grilles designed for industrial and commercial applications. The grilles
allow air movement through the building whilst giving security to the opening.
Each door is custom manufactured to suit most types of structural opening and
designed to give a smooth, quiet operation, whilst retaining a neat,
self-contained appearance.
Maximum opening sizes – 11,000mm clear width x
7,000mm clear height.
Weight – 15kg/m².
Standard headroom
1900mm clear
opening height – coil box size: 250mm
3000mm clear opening height – coil box
size: 300mm
4500mm clear opening height – coil box size: 350mm
7000mm
clear opening height – coil box size: 400mm
Percentage clear vision – 72%
Curtain
Constructed from galvanised 14mm x 1.2mm thick tubes and 2mm
thick flat links. The curtain is assembled into a ‘brick bond’ pattern with
spacing of 322mm width x 60mm vertical centres and each are locked to prevent
lateral movement.
Bottom Rail
Constructed from a 14 x 70mm extruded box section.
|
Side guides
Formed from cold rolled mild steel channels and secured
into the opening by continuous box sections.
Roller
assembly
Constructed from mild steel tube.
Endplates
The
roller assembly is supported by mild steel endplates with mounting
angles.
Roller enclosure (Optional)
Formed from a galvanised
pressed metal sheet to enclose the rear of the shutter barrel and curtain
assembly.
Operation
Hand chain
operation
Electric operation using an enclosed tube motor to suit the size of
the opening, fixed within the barrel. Standard voltage 240v single phase 50Hz or
415v 3 phase 50Hz.
Optional extras
Remote control
Opening on
receipt of fire signal
Solenoid locking
Card reader operation
Key
switch operation
Induction loop operation
|
|
Products 