Safeguard 100
A vertical roller shutters available with manual or electric operation with either solid or perforated curtain.

Dimensions:
Opening height up to 6000mm, opening width up to 6000mm.
Shutter weight: 35 kg/m² of door opening.

Curtain
Constructed from 100mm galvanised cold rolled flat sections of suitable gauge, each alternate lath is fitted with a Nylon endlock to prevent lateral movement and wind anchor locks on larger doors. The perforated version has multiple micro circular perforations.

Bottom Rail
The base of the curtain is fitted with a steel angle reinforcing rail of adequate size forming an inverted ‘T’.

Side Guides
Formed from cold rolled mild steel channel sections secured to the opening structure by full height mild steel fixing angles.

Roller Assembly
Constructed from mild steel tube fitted with counterbalance high tensile helical springs, mounted on bright steel shafts running in ball races, reduction drive gearing where applicable is by machine cut steel gears or chain drive to suit the size of the opening.

Endplates
The roller assembly is supported by mild steel endplates with mounting angles for fixing to the support structure.

Roller Enclosure (optional extra)
Formed from galvanised pressed sheet metal to enclose the rear of the shutter barrel and curtain assembly.

Operation
Conventional electric motor with push button control and chain override.
Tube motor within coil with toggle switch or keyswitch control and hand crank override.
Manual haul chain operation.
Automatic opening and closing

Finish
All parts not galvanised are painted in one coat of grey protective primer.

Optional
Polyester powder coat finish to most ral colours, HP200 pastisol range fo colours (subject to avalibility).